Contemporary Slimline Exhaust Fan 150mm / 2 Finishes
A contemporary slimline 150mm exhaust fan featuring a German made motor by Fanco. Suitable for either ceiling or wall installations, and can be connected to duct so the air may be exhausted out of the house. It also has a built-in back draft shutter (a clear plastic flap at the back) to stop warm air escaping or external air coming in through the fan. Produced in White or Brushed Aluminium along with a range of accessories.
Accessories are priced and selected seperately.
Popular with interior designers and architects due to its minimalistic form, this model is commonly used in toilets and powder rooms.
Manufacturer: Fanco, Germany
Finishes: White | Brushed Aluminum
Capacity: 0264 m3/hr
Capacity (L/S): 73.3 l/s
Motor Wattage: 024w
Noise Level: 37 dB(A)
IP Rating: IP34
Dimensions: Ceiling Hole 150mm | Wall Hole 150mm | Duct Hole 150mm
Warranty: Manufacturer 2 year replacement warranty (conditions apply)
Metal Brick Sized External Vent 150mm - Premium exterior aluminium vent with duct adaptor. Fits standard brick sizes. The fascia is quality weatherproof aluminium with an inbuilt anti-intrusion mesh. The boot at the rear of the vent is white plastic and opens out to allow for connection to 150mm ducting.
Metal Builders Choice Vent 150mm - The Builder's choice is a Anodized Aluminium vent designed for exterior wall installations. Vermin proof mesh is also built into the vent. Includes duct adaptor at the rear to allow for connection to 150mm diameter duct.
Stainless Steel Hood Vent 150mm - The 304 grade Stainless Hood vents are suitable for external wall installations. This vent comes with a rear spiggot to connect to 150mm diameter ducting. Includes a rubber seal to ensure a weatherproof and tight seal to the external wall.
Stainless Steel Dome Vent 150mm - The 304 grade Stainless Dome vents are suitable for external wall installations. This vent comes with a rear spiggot to connect to 150mm diameter ducting. Includes insect screen as well as a rubber seal to ensure a weatherproof and tight seal to the external wall.
Stainless Steel Gravity Vent 150mm -A metal vent that has gravity operated shutters. Designed to connect to 150mm ducting. Includes a rubber seal to ensure weatherproof and tight contact to the mounting surface.
Plastic Gravity Vent 150mm - A basic plastic vent that has gravity operated shutters. Designed to connect to 150mm ducting. Constructed from ABS UV stabilised polymer and easily installed via four screws.
Plastic Flyscreen Vent 150mm - The Vent Fixed Flyscreen is a vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves. It is available in white and comes with a built-in flyscreen.
Flexible Ducting 150mm - This Flexible Duct is 6 meters in length and 150mm in diameter. The length of flexible duct can be cut down to suit your required length.
Run On Timer - (Variable 2-30 Minute Timer) This Run on Timer enables the fan to operate within the set time period after switching the fan OFF. After the selected time has passed the fan switches automatically OFF. The run-out timer is generally applicable for the fans installed in bathrooms, WC or kitchens. For use with TT, VKM and VKP motors only.
THESE MAY ALSO BE OF INTEREST
Contemporary Slimline Exhaust Fan 100mm / 2 Finishes $98.00
A contemporary slimline 100mm ..
Profile Plus LED 4 $229.00
A high extraction 3 in 1 bathr..
The Martec GYRO white or silve..
Contour 4 $99.00
3 Year "In-home" Warranty Exce..