Contemporary Slimline Exhaust Fan 125mm / 2 Finishes
A contemporary slimline 125mm exhaust fan featuring a German made motor by Fanco. Suitable for either ceiling or wall installations, and can be connected to duct so the air may be exhausted out of the house. It also has a built-in back draft shutter (a clear plastic flap at the back) to stop warm air escaping or external air coming in through the fan. Produced in White or Brushed Aluminium along with a range of accessories.
Accessories are priced and selected seperately.
Popular with interior designers and architects due to its minimalistic form, this model is commonly used in toilets and powder rooms.
Manufacturer: Fanco, Germany
Finishes: White | Brushed Aluminum
Capacity: 0166 m3/hr
Capacity (L/S): 46.11 l/s
Motor Wattage: 016w
Noise Level: 34 dB(A)
IP Rating: IP34
Dimensions: Ceiling Hole 125mm | Wall Hole 125mm | Duct Hole 125mm
Warranty: Manufacturer 2 year replacement warranty (conditions apply)
Stainless Steel Gravity Vent 125mm -A metal vent that has gravity operated shutters. Designed to connect to 125mm ducting. Includes a rubber seal to ensure weatherproof and tight contact to the mounting surface.
Plastic Gravity Vent 125mm - A basic plastic vent that has gravity operated shutters. Designed to connect to 125mm ducting. Constructed from ABS UV stabilised polymer and easily installed via four screws.
Plastic Flyscreen Vent 125mm - The Vent Fixed Flyscreen is a vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves. It is available in white and comes with a built-in flyscreen.
Flexible Ducting 125mm - This Flexible Duct is 6 meters in length and 125mm in diameter. The length of flexible duct can be cut down to suit your required length.
Run On Timer - (Variable 2-30 Minute Timer) This Run on Timer enables the fan to operate within the set time period after switching the fan OFF. After the selected time has passed the fan switches automatically OFF. The run-out timer is generally applicable for the fans installed in bathrooms, WC or kitchens. For use with TT, VKM and VKP motors only.
Ventair Timer - (Variable 1-25 Minute Timer for Axial Exhaust Fans)) This variable timer can run for 1 to 25 minutes after switching the fan off, to clear steam and odour once you leave the room.